Glass bead Sterilizers

 

 

 Product Features

1, Compact appearance design, digital display temperature at real-time. It can be used in ultra clean workbench.

2, Stainless steel inner container, built-in high-performance heating element, high precision of temperature controller and overtemperature protection.
3, Inner temperature of container is equipped with high temperature sterilization bead can be heated to about 300 ℃.
4, Small volume, light weight, simple operation, long working life.
5 Randomly configurate diameter 1.5 ~ 2.0 mm of glass beads.

 

Technical parameters

  

Model

HY-300

HY-300D

Temp. Control Range

100 ~300

100 ~300

Temp. Stability

≤±5

≤±5

Heating Speed

≤25min

≤25min

Heating Well Volume

 Φ40 x 80mm

Φ40 x 150mm

Glass Beads Capacity

150g

150g

Cover Material

Stainless Steel

Stainless Steel

Insulation Material

Green Mineral Wool

Green Mineral Wool

Voltage

AC 220 / AC 110V, 50/60Hz

AC 220 / AC 110V, 50/60Hz

Power

300W

300W

Fuse

250V,2A/3A, Ф5×20

250V,2A/3A, Ф5×20

Dimension (WxDxH)

130 x 150 x 200mm

130 x 150 x 240mm

Net Weight

2kgs

2.5kgs

 

Attention:

1, with clean, dry glass beads filled in sterile container.The standard depth below the edge of stainless steel container about 2cm. Please don’t use other fillers or liquid contact to  container.

2. Turn on the power switch and take some time to heat.Then the vessel temperature can reach to the set temperature. Under the conditions of power turning on it will keep the internal temperature.

3. Don’t touch the glass beads or sterilization container before cooling! Avoid burns!

4, Insert the drying equipment needs to be sterilized to sterilized glass beads as much as possible  at least 10s.

5, Turn off the power switch and the closed the cover after finished to prevent dust and foreign matter.

6, Sterilized glass beads must be cleaned at least once per week. Should wait until the instrument cooled completely when getting out the glass beads.

 

7, Reuse after strictly clean and dry. (Get the glass beads out and clean with mild detergent soap, After rinsing ,it can be dried)


Sterilizers

 

 

 

 

 

  

Product features

1, Based on the principle of infrared, products are widely used in loop or inoculating needle sterilization, completely replace the alcohol lamp.

2, The temperature of heating hole can reach 800, sterilization only takes 5-7 seconds, thorough sterilization. Products can be used in anaerobic chamber.

3, small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation.

4, organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination.

5, precise temperature control technology, avoid the heating components work overload, long life.

 

 Technical parameters:

 

Product specification

HY-800 Small

Diameter Sterilizer

HY-800D Large

Diameter Sterilizer

The Center High-Temperature

825± 50

Standby Constant Temperature

480

The Max-Diameter Of Sterilizer Goods

Φ14mm

Φ35mm

The Length Of Sterilizer

140mm

100mm

Power

AC220V±22V50Hz±1Hz200W

Net Weight

1.3Kg

1.5Kg

  Normal working conditions

 

Working Condition Temperature

10~50

Relative Humidity

≤90%

Working Condition Maximum Elevation

NO Limited

About Us

Contact Us

Scroll to top